- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Origin-8's Trackstar Crankset is made of light and durable forged aluminum and features a stylish machined-aluminum 46-tooth 1/8-inch chainring for excellent power transfer on the road and track.
$49.99 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
$270.99 - $279.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
Sprint-worthy stiffness meets climb-friendly weight in SRAM's RED Crankset. Advanced analysis of pedaling forces has yielded a hollow construction design that incorporates an integrated, four-arm spider and larger crank arms to achieve the lofty weight and strength goals. Together with X Glide R chainrings and a RED front derailleur (sold separately), your front shifting will receive a major boost in speed, efficiency, and simplicity. SRAM's new X Glide R chainrings start out as 5mm-thick aluminium plates which are precision machined to eliminate all unessential material while retaining extreme stiffness to provide fast, crisp shifting. And SRAM didn't stop there; plenty of attention was given to the placement of the shift pins and ramps, which are optimized to coordinate your shifts with your natural cadence.
• ISIS interface • Only includes left crank • 175mm length
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
• Square taper interface • Only includes left crank • 175mm length
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
- Pedal Spindle: 9/16" - BB Included: No - Chainring BCD: 96 Shimano Asymmetric - Intended Use: Mountain - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 141/148 Boost Hubs
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - NEW Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Available in "Mini" 32-36t and "Mega" 36-40t sizing - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells)
Campagnolo's Record Pista Crankset gives you amazing power transfer for the toughest sprints. If your days are spent dreaming of velodrome glory, then make sure you have the crankset that can get you there.
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
FSA’s Road PowerBox Carbon Crankset employs a P2M convertible spider design for multiple chainring options. FSA's hollow carbon arms and BB386EVO spindle mated together produce a very lightweight, extremely versatile power meter crankset available with a double chaining configuration. Software upgrades are available for even more features. - Hollow carbon arms with UD carbon finish - BB386EVO 30mm AL 7050 alloy spindle fits every frame (purchase BB separately) - AL7075 CNC chainrings - AL7075 Torx T-30 alloy chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Spider-based power sensors provide total power output measurement of both legs, with Left & Right leg output analysis available with system upgrade - Bluetooth connectivity available with system upgrade - Battery life is approximately 300-400 hours - Easy-to-replace CR2450 battery
Back in the day, we drilled holes in our chainrings to make them lighter. The weight savings were minimal, but they sure looked cool. Velo Orange's Drillium Crankset recaptures the look. It's based on their Grand Cru 110 cranks with a very low 150mm Q-factor. And, while it may look like a vintage crank, the Drillium is cold forged in modern high-strength alloy. The 7075 alloy chainrings are highly durable, featuring ramps and pins for fast and smooth shifting with 6-10 speed drivetrains. The crank arms have classically styled reliefs, and the alloy dust caps function as self extractors with the supplied crank bolts. - Spindle interface: square taper JIS - BCD: 110mm - Weight: 645g
Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests. -Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings -Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup -Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly -Requires use of Power-Torque bottom bracket cups -Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain -Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
$225.00 - $250.00
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
- Solid pedaling efficiency - New 3D composite chain ring teeth composition is optimized for each chainwheel load out - Balance of strength and weight in 2-piece crank construction - Improved driving rigidity - Close ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Small ball bottom bracket - Series : SLX - Crank Construction: HOLLOWTECH II Technology - Bottom Bracket: BB-MT800/BB-MT800-PA - Chain Line: 48.8 - Average Weight: 788.7g (28-28T) 761.4g (36-26T) 739.8g (34-24T)
- Crank Construction : HOLLOWTECH II - Optimum power transfer
$193.00 - $209.00
SRAM's GX-1400 1x Crankset delivers consistent performance every time out. Featuring SRAM’s X-Sync tooth profile, the GX single-chainring crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. - Open Core and X-Sync Technology - CNC machined 7075, two-tone anodized X-Sync chainring (30/32T) - Weight: 680g (GXP, 175mm, 32T)
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor
$219.99 - $222.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
WeThePeople's Team Crank uses a super-tough 2 1/2 piece construction, a larger 22mm spindle, and square-shaped chromoly arms to maximize strength. WeThePeople looked at areas where other brands' cranks often failed and toughened up areas like the pedal boss with its own investment cast gusset, to beef things up and eliminate those failures. The Legacy Crank also comes in a shorter 165mm option for all you 4-peggers out there.
Page 1 of 10 Next page