Filter By:
Parts & Accessories
$198.95
The Ultimate in Rear Hydration Systems. The next generation of our world championship winning Carbon Wing adds extra user adjustability and saddle compatibility into a faster than ever package.
- TWICE AS FAST: Extensive aero research offers nearly twice the time savings over previous generations.
- INCREASED ADJUSTABILITY: From the carrier to the cage, all optimizing speed and bottle access.
- INCREASED BOTTLE RETENTION: Cages re-positioned for optimum retention and easier access.
- CARBON BEAM: Special proprietary layup helps reduce cage vibration.
- WIDER COMPATIBILITY: Fits the widest range of saddle rails by mounting on the saddle's horizontal rail.
$140.95
Introduction
- Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years.
- Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag.
Storage
- We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP.
- As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG.
- Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG.
Hydration
- With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers.
Adjustable Mounting
- One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation.
- In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions.
Lightweight
- We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams.
Bottom Line
- The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros!
Includes:
- Carbon Sonic chassis
- One Pair X-Straps
- All hardware and instructions
Material
- Carbon Fiber proprietary unidirectional orientation.
Weight
- Chassis 49 grams, Hardware 30 grams. Total 79 grams
Limited Lifetime Warranty
- Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
$114.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$104.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$74.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails.
- Material: CNC aluminum
- Hydration Capacity: One or two bottles (up to 750cc each)
- Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Max Load: 2.5 kg / 5.5 lb
- Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included
- Angle adjustable
- Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9”
- Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
$64.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs.
- Material: Pressed aluminum
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Hydration Capacity: One or two bottles (up to 750cc each)
- Max Load: 2.5 kg / 5.5 lb
- Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage
- Added Feature: 2 angle positions
- Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7”
- Weight: 97 grams
$49.95
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
$42.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)
$34.95
The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.
$30.00
Hydration on the road is critical, and the Direct Mount Reserve Rack helps ensure that you have adequate supplies of H2O or your liquid nutrition of choice right there when you need it. This simple water-storage solution holds up to two water bottles, provides a sleek and aero profile, and mounts easily under any SWAT-compatible saddle.
- Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.
- Holds up to two water bottles behind the saddle for a more aerodynamic profile.
$30.00
Specialized's Reserve Rack is the aero way to carry water and inflation tools on your bike. The Reserve Rack fastens to your saddle rails and allows you to mount a water bottle cage, mini pump, and two CO2 canister where they'll stay tucked out of the wind.
$29.95
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions.
- Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside
- Includes: plastic cage, Allen key, screws and washers
- Fits and encloses up to an average 20oz bottle and has enough room for a heat pack
- Extended zipper pull for easy open close while riding with winter gloves
- Reflective material on logo
$27.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$27.49
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.
$26.99
TWIST Bottle Connector for TWIST 450, 590, 600, and 750 Bottles. Not compatible with TWIST 800 or KEEGO Bottles.
Easily attach your new connector by placing it in the Connector indent on your Bottle and locking it in with a coin. Replace your connector on your existing set or add to a Replacement Bottle.
- Compatible with TWIST 450, 590, 600, and 750 Bottles
- Not compatible with TWIST 800 or KEEGO Bottles
- Compatible with all TWIST Bases: Bike Base, Tex-Base, and Uni-Base
$26.99
If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties.
On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame.
- Compatible with frame tubes with a width of 28-62 mm
- Rubber back for frame protection
- Compatible with all TWIST Bottles
- Attach and detach with ease
$24.99
Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases.
Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin.
- Suitable for all TWIST bottles with a belt
- Fits all TWIST bases
$21.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter
$19.99
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame.
- Weight: 94g
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$18.99
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options
- Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included
- Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$15.99
Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages.
Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)
$14.99
Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.
$13.95
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options.
- Fits tubes 20 - 60mm
- Engineering grade polymer
- Max load: 1.5 kg / 3.31 lb
- 26 g / 0.92 oz (2 pcs)
$12.99
Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base.
Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base.
Compatible with all TWIST Bottles.
- Includes TWIST Bike Base and screws for mounting to standard braze-ons
- Compatible with all TWIST Bottles
$12.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
Page 1 of 2
Next page