Electronics

Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

Specialized's SpeedZone Sport provides all the data you need to quantify your rides. Its easy-to-read, double-line display lets you quickly check speed, mileage, and a whole host of other important functions. Plus, the SpeedZone's easy calibration makes setup a breeze and its interface is incredibly intuitive so you can spend more time pounding out the miles than trying to figure out how far you've ridden.

Specialized's SpeedZone Sport Wireless provides all the data you need to quantify your rides in a neat, cordless package. Its easy-to-read, double-line display lets you quickly check speed, mileage and a whole host of other important functions. Plus, the SpeedZone's easy calibration makes setup a breeze and its interface is incredibly intuitive so you can spend more time pounding out the miles than trying to figure out how far you've ridden.

The Speedzone II gets right down to business—no frills, just the facts. Want to know how fast or far you’re going or how long it’s taken you to get there? This compact little unit will spell it out in large, easy-to-read digits. With a display unencumbered by extraneous info, you can see at a glance the basics of your ride. And to keep things simple, the unit also includes auto-wake and auto-timer, so you don’t even need to push the button when you stop or start your ride. - Designed for a super-fast and easy set-up. - Modern quarter-turn mount looks fast on every cockpit. - Speed and time of day fields are always on. - Scroll through distance, timer, average speed, and maximum speed. - Auto-wake and auto-timer: no need to push a button to start/stop the computer. - Odometer function included. - Average speed comparator and low-battery indicator. - Small in size, but it has large digits for easy viewing. - Updated tire library covers nearly all popular tires sizes. - Improved thread-on spoke magnet is stronger and easier to use.

The new Turbo Connect Display (TCD) is the best way to view data on your Turbo. It not only displays basic ride metrics (speed, cadence, power, battery level, and time), but it also lets you toggle between modes. Its design, meanwhile, is rugged and clean, and it has multiple mounting options for either road or mountain setups. As for the latest version of the Mission Control App, you’ll find that it now has more features and is even more intuitive to use. It lets you custom-tune nearly every aspect of the bike with ease, monitor your power usage, control your range, perform basic system diagnoses, and record/upload rides. - Monochrome LCD display (black/white). - Screen Size: Height (40mm), Width (35mm), Diagonal (52mm), Display (2 inches) - ANT+ & Bluetooth modules for easy communication. - Sits centrally on the handlebars at the stem and has either a twist-lock or an optional theft-resistant lock. - Twist-lock can be turned on the handlebars, while the display also fits others popular mount options. - Protection standard IPX7 (suitable for splashes, rain, or snow).

Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status

This is a custom Li-Ion Turbo Vado Battery that has a 604Wh capacity that works with all Turbo Vado models. It's fully integrated with the frame, removable for easy charging, and lockable for added security. - Battery features a 604Wh capacity. - Works with all Turbo Vado models. - Lockable and down tube integrated. - Chargeable either on- or off-the-bike. - Includes LED power indicator.

The BC 14.16 STS CAD comes with an STS speed transmitter and an STS cadence transmitter. It's the perfect computer for attacking the hills with enhanced altitude measuring funtions, including an altitude profile graph and current gradient. Using NFC technology and the free SIGMA LINK app,the BC 14.16 STS CAD can communicate with Android smartphones to program and download ride data. Bike function: - Speed - Average speed - Comparison of current/avg. speed - Maximum speed - Trip distance - Total distance (Bike 1 & Bike 2) - Ride time - Total ride time (Bike 1 & Bike 2) - Trip Section Timer - Clock (12/24h) - Current temperature - Altitude functions: - Current altitude - Current gradient - Trip altitude gain - Maximum trip altitude - Total altitude (Bike 1 & Bike 2) - Altitude graph Cadence: - Current cadence - Average cadence Features: - NFC communication w/Android smartphone via SIGMA LINK app - Full text display with 7 available languages - Predefined tire sizes - 2 adjustable wheel sizes - Ride time 100 h - Automatic start/stop w/motion sensor - Back function via memory chip - Battery status display - Home altitude - Workout statistics for 12 months - Automatic bike recognition - Automatic pairing - Backlight - Watertight in accordance wit IPX8 - Tool-free mounting

The BC 7.16 ATS offers all of your basic cycling functions, with the addition of total ride time and average speed, in a wireless set up. A large display packed into a sporty design makes it an essential companion for every ride. Paired with Sigma's ATS transmitter, the BC 7.16 ATS is a great wireless option for beginners and seasoned riders alike. Bike Functions: - Speed (kph/mph) - Average speed - Trip distance - Total distance - Ride time - Total ride time - Clock (12/24h) Features: - Full text display with 7 languages - Predefined tire sizes - Ride time up to 100 h - Adjustable scan mode - Automatic start/stop (ATS model for 2 hrs. in standby mode) - Watertight in accordance with IPX8 - Tool-free mounting

The MySpeedy computer is all about fun. Each component is perfectly color-coordinated. No matter which style you choose, the bracket, silicone ring, and the silicone straps all match perfectly. The display animations, such as the wake-up screen with a robot or a smiley, are a special highlight. Other notable features include the automatic start/stop function made possible by a motion sensor as well as the transport mode, which is represented by a car icon. Bike Functions: - Current speed - Current ride time - Distance traveled - Total distance traveled - Clearly legible dot matrix display - All values displayed in large format - Functions displayed as icons - Extremely user friendly with just one button - Attach to handlebars quickly and simply - Easy-to-attach wireless transmitter - Watertight

Sigma's universal computer mount features a wired speed sensor, so you can use your Sigma cyclo-computer on a second bike. This kit comes with O-rings and a spoke magnet.

The Serfas PH-1 Bicycle Phone Holder fits mobile devices with screens 4.7 to 5.5-inches in size. It's made of soft stretchy silicone that won't scratch your device. The injection molded Nylon mount attaches easily to any size bicycle handlebars with a secure strap and single-nut adjustment system. The mount can rotate 360 degrees and locks at every 90-degree rotation for vertical or horizontal screen viewing. - Accommodates Single Mobile Device With 4.7 to 5.5 inch Screen (e.g. iPhone 8, iPhone 8 Plus, and other comparably sized devices) - Easy-To-Use Handlebar Mounting System - Silicone Holder Can Be Removed From Mount With Quick Release Tab - Size: 136mm x 46mm x 19.5mm - Materials: Silicone (Holder) / Nylon (Mount) - Weight: 51.8g

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove

Benefit from tracking the most interesting, accurate, valuable, motivating and fun information while you're riding your Kurt Kinetic trainer, with their inRide Watt Meter. It uses your iPhone or iPad's Bluetooth communication technology to pair a power sensor pod and heart-rate monitor with Kinetic's inRide iPhone app so you can track your wattage with any Kinetic fluid trainer (smartphones and trainers sold separately). Tailor your workouts to meet your riding goals by logging your entire workout history, and even email your data to a coach for analysis and training planning. With the easy-to-install sensor and quick-download app, you'll be rolling and logging data in no time.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.

Whether your goal is to beat yesterday with a faster or longer ride or dial in your training for a race, Garmin's Edge 820 puts the features you crave at your fingertips. This compact, touchscreen GPS cycling computer offers advanced performance monitoring, bike-specific turn-by-turn navigation, the new GroupTrack feature and more. - Lightweight and compact with 2.3-inch high-resolution, capacitive touch display that works with gloves and when wet - GroupTrack feature keeps tabs on everyone in your riding pack - Advanced performance monitoring includes VO2 max, recovery advisor, Strava live segments, FTP, performance condition and advanced cycling dynamics - Built-in incident detection included; compatible with cycling awareness accessories such as Varia Vision, Varia smart bike lights and rearview radar - Bike-specific navigation preloaded with Garmin Cycle Map for turn-by-turn navigation

Touchscreen Touring Bike Computer with Connected Features - Easy-to-use GPS bike computer with high resolution, 3-inch glove- and rain-friendly touchscreen that’s visible even in direct sunlight - Includes preloaded Garmin Cycle Map with turn-by-turn navigation and Trendline popularity routing to find the on- and off-road routes most-traveled by cyclists - Built-in GPS tracks how far, how fast, how high and where you ride - Compatible with Varia cycling awareness devices, including smart bike lights and rearview radar to detect cars and alert drivers - When paired with your compatible smartphone, you gain connected features, including LiveTrack and GroupTrack, smart notifications, rider-to-rider messaging and built-in incident detection - Battery life: up to 12 hours General Specs: - Physical dimensions: 4.1" x 2.2" x 0.9" (105.0 x 55.0 x 22.0 mm) - Weight: 4.1 oz (116 g) - Water rating: IPX7 - Battery: rechargeable lithium-ion - Display size:1.5" x 2.6" (39.0 x 65.0 mm); 3.0" diag (76.0 mm) - Display resolution: 240 x 400 pixels, touchscreen - Color display - Battery life: up to 12 hours - High-sensitivity receiver In The Box: - Edge Explore - Mounting hardware - microUSB cable - Documentation

Easily transfer your Forerunner 910XT from wrist to handlebar as you go from running to riding. The Quick Release Kit takes just seconds to mount and comes with a quick release bracket, two bike mounts, and two extra pins.

The Smartphone Caddy II is designed to securely hold iPhone 6, 6s, SE, 5, 4.7" Android Devices, and most smartphones with protective cases. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Devices/cases up to a maximum: 5.5 x 2.9 x .625 inches (H x W x D) - Handlebars up to 1-3/8-inch diameter

Mounts a tablet to the handlebars of a bike in a trainer or a spin bike. - For indoor use only (spin bikes/trainers/rollers) - Universal clamp attaches to all round bars up to 1.5" diameter - Viewing perspective can be set for preference, landscape or portrait - Includes touch screen friendly splash-proof bag - Instant removal and installation of device - Hold tablets 9-10"